ACS Omega· 2026Q1
Karışık Oksit Ön Maddelerinden Nadir Toprak Zirkonat A2Zr2O7 Tek Kristallerinin Doğrudan Lazer Isıtmalı Pedestal (Çokralski) Büyütülmesi
Direct Laser-Heated Pedestal (Czochralski) Growth of Rare-Earth Zirconate A 2Zr2O7 Single Crystals from Mixed-Oxide Precursors
- 0atıf
- Q1SCImago
- 2026yıl
Kısa özet
Yeni bir lazer ısıtmalı pedestal yöntemi, nadir toprak zirkonat A2Zr2O7 tek kristallerini doğrudan karışık oksit tozlarından üreterek ön madde hazırlığını basitleştirir ve işlem süresi ile enerjiyi azaltır.
Yapay zekâ ile başlık ve abstract'tan üretildi; tam metin okunmaz.
Ana noktalar
- A2Zr2O7 tek kristallerinin üretimi için karışık oksit ön maddeleri kullanan bir lazer ısıtmalı pedestal büyütme yöntemi geliştirildi.
- Bu yaklaşım, tam reaksiyona girmiş polikristal çubuk ihtiyacını ortadan kaldırarak ön madde hazırlığını basitleştirir.
- Yöntem, işlem süresini, enerji tüketimini ve elleçleme adımlarını azaltır.
- 11 farklı nadir toprak zirkonat bileşimine başarıyla uygulandı ve santimetre ölçekli tek kristaller üretildi.
- Teknik, diğer refrakter oksit sistemlerine aktarılabilir niteliktedir.
Yapay zekâ ile başlık ve abstract'tan üretildi; tam metin okunmaz.
Özet (abstract)
Abstract High-quality single crystals of refractory oxides are essential for fundamental investigations and advanced functional characterization, yet their preparation is frequently limited by demanding precursor processing and the extremely high temperatures required for crystal growth. Here, we present a practical, reproducible, and experimentally accessible protocol for the preparation of rare-earth zirconate A2Zr2O7 single crystals based on direct processing of mixed-oxide precursors using a laser-heated pedestal (modified Czochralski) technique. In contrast to conventional approaches employing fully reacted polycrystalline feed rods, the proposed route starts directly from homogenized stoichiometric oxide mixtures, substantially simplifying precursor preparation, therefore reducing processing time, energy consumption, handling steps, and opportunities for contamination. The manuscript focuses on the technological aspects of the preparation procedure, including precursor fabrication, optimization of crystal-growth parameters, processing considerations, as well as practical limitations, scope, and applicability of the method. The protocol was successfully applied to 11 selected A2Zr2O7 compositions (A = Y, La, Nd, Eu, Gd, Dy, Ho, Er, Tm, Yb, and Lu), producing centimeter-scale single-crystalline ingots suitable for subsequent materials research. Representative structural and microstructural characterization confirms phase purity, crystallinity, and near-nominal cation stoichiometry, while detailed structural properties of the individual compounds are reported elsewhere. The presented methodology provides a robust and experimentally accessible route for the preparation of high-melting oxide single crystals and may be readily transferable to other refractory oxide systems requiring localized high-temperature melt growth.
Yazarların özeti; kaynağından alınmıştır. ACS Omega, 2026 · DOI ↗
Ücretsiz hesapla devam et
Makaleye Sor ile bu makaleye günde 3 soru ücretsiz; makaleyi kaydet, kaynakçasını al, ilgi alanına göre her gün yeni özetler. Çıkarımlar Premium.
Web'de ücretsiz devam etGoogle ya da Apple hesabınla giriş; kart istemez. Bu makaleye geri dönersin.
Telefonda:
Alan: Seramik ve Kompozitler
Ceramics and CompositesMaterials Science