PofoliaPofolia ile paylaşıldı

Infrastructures· 2026Q2

Çelik Lifler Betonarme Döşemelerin Darbe Direncini Artırır

Drop-Weight Impact Response of Self-Compacting Concrete Slabs Reinforced with Industrial, Recycled and Hybrid Steel Fibres

Kasra Hosseinmostofi, Fatemeh Soltanzadeh, Isabel Brito Valente, Ali Edalat-Behbahani ve diğerleri

Kısa özet

Sanayi tipi (ISF), geri dönüştürülmüş (RSF) veya hibrit çelik liflerle takviye edilmiş kendiliğinden yerleşen beton (SCC) döşemeler, düz SCC'nin aksine, damla ağırlık darbesi altında delinme ve arka yüz sıyrılmasını önlemiştir.

Yapay zekâ ile başlık ve abstract'tan üretildi; tam metin okunmaz.

Ana noktalar

  • Lifsiz SCC döşemeler damla ağırlık darbesi altında delinmiş ve sıyrılmıştır.
  • Test edilen tüm çelik lif takviyeleri (ISF, RSF, hibrit) delinme ve sıyrılmayı önlemiştir.
  • ISF döşemeler en küçük tepe ve terminal artık sehim değerlerini göstermiştir.
  • Lifli beton döşemeler için tepe temas kuvvetleri (256-286 kN), lifsiz SCC'ye (110 kN) göre önemli ölçüde daha yüksekti.

Yapay zekâ ile başlık ve abstract'tan üretildi; tam metin okunmaz.

Özet (abstract)

This study compares the drop-weight impact response of self-compacting concrete (SCC) slabs with industrial (ISF), recycled tyre-derived (RSF), and hybrid ISF–RSF steel-fibre reinforcement. Four 1200 × 1200 × 100 mm slabs were tested at 28 days: plain SCC and slabs containing 90 kg/m3 ISF, 90 kg/m3 RSF, or 45 kg/m3 of each. A 105 kg projectile was released from 4.0 m (nominal potential energy 4.12 kJ). Damage, mean underside deflection, contact force and local acceleration were recorded. The plain slab perforated and developed rear-face scabbing; none of the fibre-reinforced slabs exhibited these failure modes under the investigated condition. The ISF slab showed the smallest peak and terminal residual average deflections, while the hybrid slab exhibited the largest peak and the RSF slab the largest terminal residual deflection. Peak contact forces were 285.83, 256.52 and 258.00 kN for ISF, hybrid and RSF, compared with 110.00 kN for plain SCC. Because one slab represented each mixture and matrix compositions varied, the comparisons are descriptive and do not isolate fibre-type effects or establish energy-absorption capacities or design values.

Yazarların özeti; kaynağından alınmıştır. Infrastructures, 2026 · DOI ↗

ÇıkarımlarPremium
Makaleye SorÜcretsiz hesapla

Ücretsiz hesapla devam et

Makaleye Sor ile bu makaleye günde 3 soru ücretsiz; makaleyi kaydet, kaynakçasını al, ilgi alanına göre her gün yeni özetler. Çıkarımlar Premium.

Web'de ücretsiz devam et

Google ya da Apple hesabınla giriş; kart istemez. Bu makaleye geri dönersin.

Telefonda:

Alan: İnşaat ve Yapı Mühendisliği

Civil and Structural EngineeringEngineering