steel research international· 2026Q2
İç Hidrojenin Östenitik Hafif Çelikte Dış Hidrojen Kaynaklı Gevreklere Etkisini Azaltma Etkisi
Mitigation Effect of Internal Hydrogen on External Hydrogen‐Induced Embrittlement in Austenitic Lightweight Steel
- 0atıf
- Q2SCImago
- 2026yıl
Kısa özet
İç hidrojen, Fe-30Mn-8.6Al-C çeliğinde dış hidrojen kaynaklı gevrekleşmeyi yaklaşık %50 oranında azaltır; bu durum yavaş gerinim hızı çekme testleriyle gösterilmiştir.
Yapay zekâ ile başlık ve abstract'tan üretildi; tam metin okunmaz.
Ana noktalar
- İç hidrojen, Fe-30Mn-8.6Al-C çeliğinde dış hidrojen gevrekleşmesini yaklaşık %50 oranında azaltır.
- Dış hidrojen, baskın olarak tanesel çatlaklarla en şiddetli gevrekleşmeye neden olur.
- Birleşik iç-dış hidrojen ortamı, stres salan daha fazla tanesel ve tanelerarası çatlağın başlamasını teşvik eder.
- Gevreklere, tane sınırı ayrılması (hidrojen destekli ayrılma mekanizması) hakimdir.
Yapay zekâ ile başlık ve abstract'tan üretildi; tam metin okunmaz.
Özet (abstract)
The influence of various hydrogen environments on the hydrogen embrittlement behavior of Fe‐30Mn‐8.6Al‐C austenitic lightweight steel was investigated using slow strain rate tensile tests. Under the experimental conditions adopted in this work, external hydrogen induces the most severe hydrogen embrittlement. In the combined internal‐external hydrogen environment, internal hydrogen can mitigate the damage to mechanical properties caused by external hydrogen, showing an approximately 50% relative reduction in hydrogen embrittlement susceptibility compared with the sole external hydrogen condition. Postmortem analysis shows that in the external hydrogen environment, relatively few intergranular cracks are dominant, and these cracks induce hydrogen accumulation and cause significant ductility loss. In contrast, in the combined internal‐external hydrogen environment, numerous intergranular and transgranular cracks initiate and release stress, which slows the propagation of cracks. In the presence of external hydrogen, the hydrogen embrittlement of lightweight steel is dominated by grain boundary decohesion based on the hydrogen‐enhanced decohesion mechanism, accompanied by localized plastic deformation around the cracks.
Yazarların özeti; kaynağından alınmıştır. steel research international, 2026 · DOI ↗
Ücretsiz hesapla devam et
Makaleye Sor ile bu makaleye günde 3 soru ücretsiz; makaleyi kaydet, kaynakçasını al, ilgi alanına göre her gün yeni özetler. Çıkarımlar Premium.
Web'de ücretsiz devam etGoogle ya da Apple hesabınla giriş; kart istemez. Bu makaleye geri dönersin.
Telefonda:
Alan: Metaller ve Alaşımlar
Metals and AlloysMaterials Science