PofoliaPofolia ile paylaşıldı

International Journal of Applied Ceramic Technology· 2026Q2

PDC Yöntemi ile ZrB 2 –ZrC–SiC Seramiklerinin Tek Kapta Sentezinde Isıtma Hızının Etkisi

Effect of Heating Rate on the One‐Pot Synthesis of ZrB 2 –ZrC–SiC Ceramics by PDC Route

Rajasekhar V. Buragadda, Athira S. R., Nisha Balachandran, Deepa Devapal ve diğerleri

Kısa özet

Zirkonoborosiloksan (ZBS) ve divinilbenzenin (DVB) harmanlanıp piroliz edilmesiyle elde edilen ZrB 2–ZrC–SiC seramikleri için tek kapta sentez rotası geliştirilmiş olup, 1, 3 ve 5°C/dk'lık ısıtma hızları seramik fazların oluşumunu etkilemektedir.

Yapay zekâ ile başlık ve abstract'tan üretildi; tam metin okunmaz.

Ana noktalar

  • ZBS ve DVB kullanılarak ZrB 2–ZrC–SiC seramikleri için tek kapta sentez rotası geliştirildi.
  • Piroliz işlemi argon atmosferinde 1500°C ve 1650°C'de gerçekleştirildi.
  • Seramik faz oluşumu üzerindeki etkileri için 1, 3 ve 5°C/dk'lık ısıtma hızları incelendi.
  • Optimize edilmiş bileşim ve işlem parametreleri CMC üretiminde kullanılmaya uygundur.

Yapay zekâ ile başlık ve abstract'tan üretildi; tam metin okunmaz.

Özet (abstract)

ABSTRACT Zirconoborosiloxane (ZBS), a preceramic oligomer, was synthesized by a nonaqueous sol–gel route in our earlier work, which yields ceramics of m‐ZrO 2 , ZrSiO 4 , and t‐ZrO 2 upon pyrolysis at 1500°C and 1650°C in argon. In the present study, a single system comprised of ZrB 2, ZrC, and SiC ceramics was obtained by a one‐pot synthesis route blending ZBS and divinylbenzene (DVB) followed by pyrolysis at 1500°C and 1650°C in argon. The effect of heating rate on the evolution of various ceramic phases was studied by adopting three different heating rates, i.e., 1, 3, and 5°C/min. On the basis of the ceramic phases desired in the final ceramic, process parameters can be tuned. The shortlisted composition of ZBS and DVB, along with the optimized process parameters, is proposed as a matrix resin for the fabrication of continuous C f /ZrB 2 –ZrC–SiC ceramic matrix composites (CMCs) by the polymer infiltration & pyrolysis (PIP) process.

Yazarların özeti; kaynağından alınmıştır. International Journal of Applied Ceramic Technology, 2026 · DOI ↗

ÇıkarımlarPremium
Makaleye SorÜcretsiz hesapla

Ücretsiz hesapla devam et

Makaleye Sor ile bu makaleye günde 3 soru ücretsiz; makaleyi kaydet, kaynakçasını al, ilgi alanına göre her gün yeni özetler. Çıkarımlar Premium.

Web'de ücretsiz devam et

Google ya da Apple hesabınla giriş; kart istemez. Bu makaleye geri dönersin.

Telefonda:

Alan: Seramik ve Kompozitler

Ceramics and CompositesMaterials Science