International Journal of Coal Science & Technology· 2026Q1
Kömür Madenciliğinden Kaynaklanan Örtü Tabanı Bozunması ve Yüzey Çökmesini Değerlendirmek İçin Nicel Bir Çerçeve
A quantitative framework for evaluating overburden disturbance and surface subsidence induced by coal seam mining
- 0atıf
- Q1SCImago
- 2026yıl
Kısa özet
Yanıt yüzey metodolojisi, gri ilişkisel analiz ve bulanık kapsamlı değerlendirmeyi entegre eden yeni bir nicel çerçeve, normalize edilmiş ortalama mutlak hata < 0,085 ile kömür madenciliğinden kaynaklanan yüzey çökmesini doğru bir şekilde tahmin etmektedir.
Yapay zekâ ile başlık ve abstract'tan üretildi; tam metin okunmaz.
Ana noktalar
- Madencilik kaynaklı örtü tabanı bozulması ve yüzey çökmesini değerlendirmek için RSM, gri ilişkisel analiz ve bulanık kapsamlı değerlendirme kullanan nicel bir çerçeve geliştirildi.
- Çökme üzerinde etkili temel faktörler belirlendi: madencilik yüksekliği, lös kalınlığı, tavan çökme açısı (pozitif korelasyon) ve tabakaya mesafe, tabaka kalınlığı, elastik modül (negatif korelasyon).
- Önemli yüzey deformasyonunu belirlemek için bir eşik değeri (φ > 3,0) ile bir bozulma indeksi (φ) tanıtıldı.
- Hongshuliang Kömür Madeni'nden jeolojik ve GNSS verileri kullanılarak model doğrulandı, yüksek tahmin doğruluğu elde edildi (ortalama mutlak hata < 0,085 normalize edilmiş).
Yapay zekâ ile başlık ve abstract'tan üretildi; tam metin okunmaz.
Özet (abstract)
Abstract Coal seam mining inevitably causes varying degrees of disturbance to the overlying strata and surface environment, necessitating the establishment of a scientific and systematic quantitative assessment framework for overburden disturbance. This study introduces a comprehensive methodology for assessing the impacts of mining activities on overburden strata. A theoretical model was developed to calculate the subsidence of a target rock stratum (TRS) during multi-panel mining, and an efficient computational tool was implemented using MATLAB. Key factors influencing TRS subsidence distribution were analyzed. The results indicate that mining height, loess thickness, and roof strata collapse angle positively correlate with TRS subsidence, while the distance between the coal seam and TRS, TRS thickness, and TRS elastic modulus exhibit negative correlations. Adjusting coal pillar width was shown to optimize the location of max-subsidence. Response surface methodology (RSM) was applied to explore the interactions among factors, revealing additive effects between positive-positive and negative-negative factors and attenuating effects between positive–negative factors. By integrating RSM, gray relational analysis, and normalization sensitivity analysis, the relative importance of influencing factors was quantified. A fuzzy comprehensive evaluation method was employed to establish a quantitative model for evaluating overburden disturbance. A disturbance index ( φ ) was introduced as a metric, with a threshold ( φ > 3.0) defined to identify significant surface deformation. The reliability of the proposed model was validated using geological borehole data and GNSS-measured surface subsidence from the No. 6105 panel of the Hongshuliang Coal Mine, achieving high predictive accuracy with an average absolute error of less than 0.085 after normalization. The analysis treated the uppermost bedrock in the study area as the TRS and provided a robust evaluation of post-mining surface disturbance. This study delivers a generalized assessment framework for predicting surface subsidence, and supporting the preliminary assessment of ascending mining feasibility and aquifer disturbance. The proposed system offers valuable insights for optimizing mining plans, managing mine-induced pressure, and protecting surface ecosystems.
Yazarların özeti; kaynağından alınmıştır. International Journal of Coal Science & Technology, 2026 · DOI ↗
Ücretsiz hesapla devam et
Makaleye Sor ile bu makaleye günde 3 soru ücretsiz; makaleyi kaydet, kaynakçasını al, ilgi alanına göre her gün yeni özetler. Çıkarımlar Premium.
Web'de ücretsiz devam etGoogle ya da Apple hesabınla giriş; kart istemez. Bu makaleye geri dönersin.
Telefonda:
Alan: Malzeme Mekaniği
Mechanics of MaterialsEngineering