PofoliaPofolia ile paylaşıldı

Analytical Chemistry· 2014Q1

Lazer Ablasyon ICPMS Analizi İçin Yeni Cihaz Sinyali Büyük Ölçüde İyileştiriyor

“Wave” Signal-Smoothing and Mercury-Removing Device for Laser Ablation Quadrupole and Multiple Collector ICPMS Analysis: Application to Lead Isotope Analysis

Zhaochu Hu, Wen Zhang, Yongsheng Liu, Shan Gao ve diğerleri

Kısa özet

Lazer ablasyon ICPMS analizi için geliştirilen yeni bir "dalga" cihazı, sinyal kararlılığını 6.6-10 kat artırır ve cıva arka planını 10 kat azaltarak daha doğru kurşun izotop analizini mümkün kılar.

Yapay zekâ ile başlık ve abstract'tan üretildi; tam metin okunmaz.

Ana noktalar

  • "Dalga" stabilizatörü ile sinyal kararlılığı 6.6-10 kat iyileştirildi.
  • Cıva arka planı 1 kat (10 kat) azaltıldı.
  • Cihaz, aerosol taşıma verimliliğini önemli ölçüde etkilemez (elementel sinyaller 0.95-1.0 aralığında).
  • Düşük Pb/yüksek Hg numunelerinde (206)Pb/(204)Pb izotop oranı belirlemesi için başarıyla uygulandı.

Yapay zekâ ile başlık ve abstract'tan üretildi; tam metin okunmaz.

Özet (abstract)

A novel "wave" signal-smoothing and mercury-removing device has been developed for laser ablation quadrupole and multiple collector ICPMS analysis. With the wave stabilizer that has been developed, the signal stability was improved by a factor of 6.6-10 and no oscillation of the signal intensity was observed at a repetition rate of 1 Hz. Another advantage of the wave stabilizer is that the signal decay time is similar to that without the signal-smoothing device (increased by only 1-2 s for a signal decay of approximately 4 orders of magnitude). Most of the normalized elemental signals (relative to those without the stabilizer) lie within the range of 0.95-1.0 with the wave stabilizer. Thus, the wave stabilizer device does not significantly affect the aerosol transport efficiency. These findings indicate that this device is well-suited for routine optimization of ICPMS, as well as low repetition rate laser ablation analysis, which provides smaller elemental fractionation and better spatial resolution. With the wave signal-smoothing and mercury-removing device, the mercury gas background is reduced by 1 order of magnitude. More importantly, the (202)Hg signal intensity produced in the sulfide standard MASS-1 by laser ablation is reduced from 256 to 0.7 mV by the use of the wave signal-smoothing and mercury-removing device. This result suggests that the mercury is almost completely removed from the sample aerosol particles produced by laser ablation with the operation of the wave mercury-removing device. The wave mercury-removing device that we have designed is very important for Pb isotope ratio and accessory mineral U-Pb dating analysis, where removal of the mercury from the background gas and sample aerosol particles is highly desired. The wave signal-smoothing and mercury-removing device was applied successfully to the determination of the (206)Pb/(204)Pb isotope ratio in samples with low Pb content and/or high Hg content.

Yazarların özeti; kaynağından alınmıştır. Analytical Chemistry, 2014 · DOI ↗

ÇıkarımlarPremium
Makaleye SorÜcretsiz hesapla

Ücretsiz hesapla devam et

Makaleye Sor ile bu makaleye günde 3 soru ücretsiz; makaleyi kaydet, kaynakçasını al, ilgi alanına göre her gün yeni özetler. Çıkarımlar Premium.

Web'de ücretsiz devam et

Google ya da Apple hesabınla giriş; kart istemez. Bu makaleye geri dönersin.

Telefonda:

Alan: Malzeme Mekaniği

Mechanics of MaterialsEngineering