PofoliaPofolia ile paylaşıldı

Journal of the Taiwan Institute of Chemical Engineers· 2026Q1

Mühendislikle Tasarlanmış PEEK Yüzeyleri Kemik Hücre Büyümesini Artırır ve Bakterilerle Savaşır

Interfacial engineering of HA-coated PEEK through microstructure control and sulfonate functionalization for improved cytocompatibility and antibacterial activity

Yu-Han Lu, Ngi‐Chiong Lau, Dave W. Chen, Kong‐Wei Cheng

Kısa özet

Lahanagül benzeri hidroksiapatit (HA) mikro yapılarının sülfonat fonksiyonelleştirmesi ile birleştirildiği yeni bir PEEK implant yüzey tedavisi, kemik hücresi büyümesini önemli ölçüde iyileştirdi ve 72 saate kadar bakteri enfeksiyonunu engelledi.

Yapay zekâ ile başlık ve abstract'tan üretildi; tam metin okunmaz.

Ana noktalar

  • PEEK üzerinde lahanagül benzeri HA mikro yapılarının sülfonat fonksiyonelleştirmesi ile birleşimi, sitotoksisiteyi azaltarak kemik hücre uyumluluğunu iyileştirdi.
  • Mühendislikle tasarlanmış yüzey, kemik hücre çoğalmasını ve yayılmasını artırdı.
  • Modifiye edilmiş PEEK yüzeyi, 72 saate kadar E. coli ve S. aureus büyümesini engelledi.
  • Hem HA mikro yapısı hem de sülfonat grupları, modifiye edilmiş PEEK numunelerinin biyolojik performansını birlikte düzenlemektedir.

Yapay zekâ ile başlık ve abstract'tan üretildi; tam metin okunmaz.

Özet (abstract)

Background The development of multifunctional biomaterial surfaces that simultaneously support bone-cell responses and reduce bacterial infection is important for orthopedic implants. However, polymer-based polyetheretherketone (PEEK) material exhibits limited surface bioactivity and insufficient antibacterial performance because of its chemical inertness and hydrophobicity. Methods A combined surface-engineering strategy was developed by integrating pH-regulated hydroxyapatite (HA) microstructures with sulfonate functionalization on PEEK substrates. Hydrothermal treatment under acidic, neutral, and alkaline conditions produced plate-like, cauliflower-like, and sea urchin-like Ca-based layers, respectively. Sodium p-styrenesulfonate (NaSS)-derived sulfonate functionalization was subsequently introduced through UV-assisted surface modification, followed by hydrothermal post-treatment to reduce loosely associated NaSS species. Significant findings The cauliflower-like HA layer prepared under neutral conditions exhibited the most favorable cytocompatibility after NaSS functionalization and hydrothermal post-treatment. Suitable modification of PEEK surface enhanced cell proliferation and spreading, reduced cytotoxicity, maintained bacterial growth inhibition for up to 72 h, and substantially decreased the accumulation of E. coli and S. aureus . These results demonstrate that the HA microstructure and the retained sulfonate groups jointly regulate the biological performance of HA-coated PEEK samples.

Yazarların özeti; kaynağından alınmıştır. Journal of the Taiwan Institute of Chemical Engineers, 2026 · DOI ↗

ÇıkarımlarPremium
Makaleye SorÜcretsiz hesapla

Ücretsiz hesapla devam et

Makaleye Sor ile bu makaleye günde 3 soru ücretsiz; makaleyi kaydet, kaynakçasını al, ilgi alanına göre her gün yeni özetler. Çıkarımlar Premium.

Web'de ücretsiz devam et

Google ya da Apple hesabınla giriş; kart istemez. Bu makaleye geri dönersin.

Telefonda:

Alan: Biyomalzemeler

BiomaterialsMaterials Science