Polymer Engineering and Science· 2026Q2
Yeşil Lastik Diş Açma Kauçuğu İçin Karbon Siyahının Kısmi Değişimi Olarak Yüzey Modifiye Edilmiş Cüruf
Surface‐Modified Slag as Partial Replacement of Carbon Black for Green Tire Tread Rubber
- 0atıf
- Q2SCImago
- 2026yıl
Kısa özet
Hibrit silikon reçine ile modifiye edilmiş endüstriyel cüruf, lastik diş açma bileşiklerinde karbon siyahının yerini kısmen alarak mekanik özellikleri korurken aşınma direncini artırır, ısı üretimini düşürür ve yuvarlanma direncini azaltır.
Yapay zekâ ile başlık ve abstract'tan üretildi; tam metin okunmaz.
Ana noktalar
- Hibrit silikon reçine aşılaması, endüstriyel cürufun kauçuk matrislerdeki dispersiyonunu iyileştirir.
- Modifiye cüruf (2.5 phr), lastik diş açma bileşiklerinde 10 phr karbon siyahının yerini alabilir.
- Modifiye cüruf sistemi, saf karbon siyahı sistemlerine eşdeğer mekanik özellikler sunar.
- Modifiye cüruf, aşınma direncini, dinamik mekanik özellikleri optimize eder, ısı üretimini azaltır ve yuvarlanma direncini düşürür.
Yapay zekâ ile başlık ve abstract'tan üretildi; tam metin okunmaz.
Özet (abstract)
ABSTRACT This study adopted hybrid silicone resin to modify industrial slag, and utilized the modified slag as a reinforcing filler to partially substitute carbon black for preparing green radial tire tread compounds. The results demonstrated that hybrid silicone resin was successfully grafted onto the slag surface, which greatly improved the dispersion of slag in the rubber matrix and eliminated filler agglomeration. When the modifier dosage was 2.5 phr to replace 10 phr carbon black, the modified slag enhanced the crosslinking efficiency and processing performance of rubber compounds, and maintained mechanical properties equivalent to pure carbon black systems. Moreover, the modified filler system obviously optimized the abrasion resistance and dynamic mechanical properties of tread compounds, lowered heat generation and rolling resistance, and realized the synergistic improvement of tire wear resistance and low rolling resistance. This work realizes the high‐value resource utilization of industrial slag, reduces carbon black consumption, and provides a feasible technical route for the development of green low‐carbon tire tread compounds and the sustainable development of steel and tire industries.
Yazarların özeti; kaynağından alınmıştır. Polymer Engineering and Science, 2026 · DOI ↗
Devamı Pofolia uygulamasında
Çıkarımlar ve makaleye soru sorma; ilgi alanına göre her gün yeni özetler. Ücretsiz.
Web'de giriş yaparak açAlan: Polimerler ve Plastikler
Polymers and PlasticsMaterials Science