BMC Oral Health· 2026Q1
Çift kürleme, simüle edilmiş oral ortamlarda silan içeren kendinden yapışkanlı rezin simanların sıvı emilimini azaltır
Influence of curing modes and simulated oral environments on the sorption of silane-containing self-adhesive resin cements: an in vitro study
- 0atıf
- Q1SCImago
- 2026yıl
Kısa özet
Çift kürleme, etanol ve laktik asidin alımı artırmasıyla, özellikle oto-kürleme altında, silan içeren kendinden yapışkanlı rezin simanlarda oto-kürlemeye kıyasla sıvı emilimini önemli ölçüde azaltmıştır.
Yapay zekâ ile başlık ve abstract'tan üretildi; tam metin okunmaz.
Ana noktalar
- Çift kürleme, test edilen tüm daldırma ortamlarında oto-kürlemeye göre daha düşük sıvı emilimi sağlamıştır.
- %20 etanol ve 0.01 M laktik asitte daldırma, genellikle distile suya kıyasla sıvı emilimini artırmıştır.
- Rezin siman, kürleme modu ve daldırma ortamı arasındaki önemli bir üçlü etkileşim, sıvı emilimini etkilemiştir (p=0.002).
- Çift kürlenmiş PANAVIA SA Luting Multi, distile suda en düşük emilimi göstermiştir (26.27 ± 0.97 µg/mm³).
Yapay zekâ ile başlık ve abstract'tan üretildi; tam metin okunmaz.
Özet (abstract)
This in vitro study evaluated the effects of curing mode and immersion medium on the fluid sorption of two silane-containing self-adhesive resin cements. Disk-shaped specimens (15 mm × 1 mm) of BeautiLink SA and PANAVIA SA Luting Multi were prepared using an ISO 4049:2019-based protocol. Specimens were polymerized using either dual-curing or auto-curing mode and then immersed in distilled water, 20% ethanol, or 0.01 M lactic acid ( n = 10 per group) for 7 days at 37 °C. Fluid sorption was calculated in µg/mm³.Data were analyzed using three-way analysis of variance (ANOVA; resin cement × curing mode × immersion medium) and Tukey’s honestly significant difference (HSD) post hoc test (α = 0.05); a container-level sensitivity analysis was also performed to assess robustness to within-container clustering. A significant three-way interaction among resin cement, curing mode, and immersion medium was observed for fluid sorption ( p = 0.002). Mean sorption values were lower for dual-cured than for auto-cured specimens across all matching immersion conditions. Under auto-curing, mean sorption values in 20% ethanol and 0.01 M lactic acid were generally higher than the corresponding distilled-water values. Dual-cured PANAVIA SA Luting Multi immersed in distilled water yielded the lowest numerical sorption value (26.27 ± 0.97 µg/mm³). The three-way interaction remained significant in the container-level sensitivity analysis ( p = 0.012). Dual-curing was associated with lower mean fluid sorption overall in the tested silane-containing self-adhesive resin cements, although the magnitude of the difference depended on cement formulation and immersion medium. Ethanol and lactic acid generally increased fluid uptake, particularly under auto-curing. Distilled-water sorption values were below the ISO 4049 water-sorption threshold; however, because water solubility was not evaluated, overall ISO 4049 compliance cannot be claimed from sorption data alone. Ethanol- and lactic-acid sorption values should be interpreted as modified solvent/acid challenge outcomes rather than direct ISO-compliance data.
Yazarların özeti; kaynağından alınmıştır. BMC Oral Health, 2026 · DOI ↗
Ücretsiz hesapla devam et
Makaleye Sor ile bu makaleye günde 3 soru ücretsiz; makaleyi kaydet, kaynakçasını al, ilgi alanına göre her gün yeni özetler. Çıkarımlar Premium.
Web'de ücretsiz devam etGoogle ya da Apple hesabınla giriş; kart istemez. Bu makaleye geri dönersin.
Telefonda:
Alan: Ortodonti
OrthodonticsDentistry