PofoliaPofolia ile paylaşıldı

Catalysts· 2026Q2

PET'nin Tetrahidrofuran İçindeki Hidrolitik Depolimerizasyonu İçin Lewis Asidi Katalizörleri Olarak Metal Oktoatlar

Metal Octoates as Lewis Acid Catalysts for the Hydrolytic Depolymerization of PET in Tetrahydrofuran

Зубков Иван Николаевич, S. A. Lavrenov, Yuri V. Korolev, Корсунова Екатерина Андреевна ve diğerleri

Kısa özet

Kobalt ve kurşun oktoatlar, THF içinde %83,7 ve %78,4 TPA verimliliği ile en yüksek PET depolimerizasyon verimlerini elde etti; kobalt oktoat, 6 saat reaksiyon süresi ve %20 ağırlık su içeriğinde optimum performans göstererek yaklaşık %85 TPA verimi sağladı.

Yapay zekâ ile başlık ve abstract'tan üretildi; tam metin okunmaz.

Ana noktalar

  • Kobalt (%83,7) ve kurşun (%78,4) oktoatlar, THF içinde PET depolimerizasyonu için en etkili katalizörlerdi.
  • Kobalt oktoatın yüksek aktivitesi, labil koordinasyon küresine bağlanırken, zirkonyumun düşük aktivitesi (%,17,5) sterik engellemeden kaynaklanmaktadır.
  • Kobalt oktoat kullanılarak reaksiyon süresinin 1'den 6 saate çıkarılması, PET dönüşümünü %27'den ~%85'e yükseltti.
  • Kobalt oktoat ile TPA verimi için optimum su içeriği %20 ağırlık olarak bulundu, bu da ~%80 TPA verimi sağladı.

Yapay zekâ ile başlık ve abstract'tan üretildi; tam metin okunmaz.

Özet (abstract)

Chemical recycling of polyethylene terephthalate (PET) with decomposition into monomers suitable for resynthesizing primary polymer is a critical task for achieving carbon neutrality in the polyester industry. This paper presents a study comparing PET depolymerization solvolysis in tetrahydrofuran medium using a series of metal octoates (Co, Mn, Zn, Ca, Ba, Li, Zr, Cu, Pb). The resulting terephthalic acid (TPA) was characterized using a combination of methods (1H NMR, thermogravimetric analysis, differential scanning calorimetry, and Raman spectroscopy). In an aprotic tetrahydrofuran (THF) medium, a comparative performance of commercial metal octoates under fixed metal-mass loading was conducted for the first time: the leadership of Co (83.7%) and Pb (78.4%) is explained by the lability of their coordination sphere, while the anomalously low activity of Zr (17.5%) is associated with steric blocking of the metal active center. In the present work, the influence of technological parameters on the depolymerization process using the most active catalyst, cobalt octoate, was studied. It was found that increasing the reaction time from 1 to 6 h leads to an increase in PET conversion from 27% to ~85%, and in TPA yield from 14% to ~84%. A study of the influence of water content in the reaction mixture showed that increasing the water concentration to 20 wt.% intensifies hydrolysis, promoting an increase in the yield of TPA to ~80%; however, a further increase in the water content (up to 30 wt.%) does not lead to a significant change in the yield, which indicates the achievement of conditions providing the highest observed isolated TPA yield within the tested range for the reaction in this system. The obtained results create a scientific basis for the rational design of catalytic systems for the depolymerization of PET, adapted to the different qualities of secondary raw materials and the technological requirements of industrial chemical recycling.

Yazarların özeti; kaynağından alınmıştır. Catalysts, 2026 · DOI ↗

ÇıkarımlarPremium
Makaleye SorÜcretsiz hesapla

Ücretsiz hesapla devam et

Makaleye Sor ile bu makaleye günde 3 soru ücretsiz; makaleyi kaydet, kaynakçasını al, ilgi alanına göre her gün yeni özetler. Çıkarımlar Premium.

Web'de ücretsiz devam et

Google ya da Apple hesabınla giriş; kart istemez. Bu makaleye geri dönersin.

Telefonda:

Alan: Polimerler ve Plastikler

Polymers and PlasticsMaterials Science