Journal of Materials in Civil Engineering· 2026Q1
Properties of Ultralight EPS Concrete Prepared Using a Powder Precoating Process
- 0citations
- Q1SCImago
- 2026year
Short summary
A powder precoating process for EPS particles boosts ultralight concrete compressive strength by up to 25.6% and flexural strength by 40.6%, while improving particle distribution and thermal insulation.
AI-generated from the title and abstract; the full text is not read.
Key points
- Powder precoating process increases ultralight EPS concrete compressive strength by 21.4%–25.6% (200–400 kg/m³ density).
- Flexural strength increased by up to 40.6% for 600 kg/m³ density concrete.
- Uniformity index improved from 0.59 (ordinary) to 0.78 (precoating), with more even EPS distribution and fewer pores.
- Thermal conductivity slope decreased from 1.64 × 10⁻⁶ to 1.57 × 10⁻⁶, indicating better insulation.
- Microscopic analysis shows improved compactness via optimized interfacial transition zone and increased C-S-H formation.
AI-generated from the title and abstract; the full text is not read.
Abstract
Abstract To address the issues of low strength, uneven particle distribution, and weak interfacial bonding in ultralight expanded polystyrene (EPS) concrete, this study proposes a powder precoating process. This process involves precoating the surface of EPS particles with a layer of powder material. The differences in the effects of this process and the ordinary process on the properties of ultralight EPS concrete were systematically compared. The results showed that the precoating process increases the compressive strength by 21.4%–25.6% for ultralight EPS concrete with a low density grade of 200 – 400 kg / m 3 , and the flexural strength is increased by up to 40.6% for the concrete with a density grade of 600 kg / m 3 . Additionally, it can effectively alleviate the phenomenon of reduced concrete strength caused by the incorporation of fly ash. The uniformity index of ultralight EPS concrete prepared by the precoating process reached 0.78, whereas that of the ordinary process was 0.59. Cross-section observations confirmed that the EPS particles are more evenly distributed, the number of pores is reduced, and the delamination phenomenon is basically eliminated. The slope of the thermal conductivity of the precoating process with increasing density decreases from 1.64 × 10 − 6 (of the ordinary process) to 1.57 × 10 − 6 , indicating that the precoating process provides better thermal insulation performance at the same density. Microscopic analysis revealed that the precoating process improves compactness by optimizing the structure of the interfacial transition zone, promoting the formation of calcium silicate hydrate (C─S─H), and reducing the residual calcium hydroxide ( Ca ( OH ) 2 ), without introducing new chemical bonds. This process provides technical support for the application of ultralight EPS concrete in energy-efficient buildings.
The authors' abstract, as published at the source. Journal of Materials in Civil Engineering, 2026 · DOI ↗
Continue with a free account
Ask the paper: 3 free questions a day about this paper; save it, get its citation, new summaries every day for your field. Takeaways are Premium.
Continue free on the webSign in with Google or Apple; no card needed. You come back to this paper.
On your phone:
Field: Civil and Structural Engineering
Civil and Structural EngineeringEngineering