PofoliaPofolia ile paylaşıldı

CEAS Space Journal· 2026Q2

LIZARD Yükü için Ticari Tedarik Edilebilir Bileşenlerin Uzay Ortamı İçin Doğrulanması

Evaluating COTS components for the LIZARD payload on micropatterned dry adhesives

Lennart Ziemer, Stefan Lobas, Vincent Mario Clermont, Silas Helgesson ve diğerleri

Kısa özet

Mikroyapılı kuru yapıştırıcıları uzayda test eden LIZARD yükü için kullanılan ticari tedarik edilebilir (COTS) bileşenlerin tamamı, titiz radyasyon (12 krad'a kadar) ve termal testlerini geçti, bu da onların alçak Dünya yörüngesi (LEO) için uygunluğunu doğruladı.

Yapay zekâ ile başlık ve abstract'tan üretildi; tam metin okunmaz.

Ana noktalar

  • LIZARD yükü için kullanılan tüm COTS bileşenleri, 12 krad'a kadar toplam iyonlaştırıcı doz testlerini geçti.
  • Mikrodenetleyici güç kaynağındaki belirli bir MOSFET (ST890) radyasyon testi sırasında arızalandı.
  • Termal testler, analiz sonuçlarını etkilemediği düşünülen bir kamera odak kayması ortaya çıkardı.
  • Kamera pozlamasını etkileyen gelen güneş ışığı, pozlama ayarlarının ayarlanmasıyla güvenilir bir şekilde azaltıldı.

Yapay zekâ ile başlık ve abstract'tan üretildi; tam metin okunmaz.

Özet (abstract)

Abstract The Long-term Investigation of Zero-gravity, vAcuum, and RaDiation effects on geckomaterials (LIZARD) payload investigates the effects of the space environment on the adhesive properties of microstructured dry adhesives (MDA). MDA are elastomers with microstructured surfaces offering a promising solution for space applications. The LIZARD payload marks the first testing of MDA in real space conditions. A key focus during development was the pragmatic use of commercial off-the-shelf (COTS) components without compromising reliability. This paper details the challenging environment in low Earth orbit (LEO), COTS component selection and verification processes for the payloads deployment aboard the 12U AIOTY-CUBE satellite. A SPENVIS simulation determined that the majority of components will receive a total dose of 1.563 krad during the 1-year mission. A total ionizing dose test was conducted at the Helmholtz-Zentrum Berlin. Critical components were subjected to $$\gamma$$ γ -radiation doses of up to 12 krad. All flight components passed the test unharmed. An ST890 MOSFET in the power supply of the designated microcontroller’s development board failed; presumably due to excessive charge build-up in its gate oxide. Thermal testing of the critical components confirmed an expected shift in the camera’s focus between temperature extremes; however, this does not affect the analysis results. AIOTY-CUBE’s lack of active stabilization necessitated an illumination test. Adversely oriented, incoming sunlight may significantly affect the built-in cameras’ image exposure. Adjusting the image exposure accordingly reliably mitigated the effect, ensuring accurate data collection and unaffected performance of image analysis tools. Redundancies for microcontrollers, non-volatile memory and file systems further enhance mission reliability. The conducted tests confirmed that the design decisions and component selections resulted in operational hardware capable of enduring the rigorous conditions encountered in LEO.

Yazarların özeti; kaynağından alınmıştır. CEAS Space Journal, 2026 · DOI ↗

ÇıkarımlarPremium
Makaleye SorÜcretsiz hesapla

Ücretsiz hesapla devam et

Makaleye Sor ile bu makaleye günde 3 soru ücretsiz; makaleyi kaydet, kaynakçasını al, ilgi alanına göre her gün yeni özetler. Çıkarımlar Premium.

Web'de ücretsiz devam et

Google ya da Apple hesabınla giriş; kart istemez. Bu makaleye geri dönersin.

Telefonda:

Alan: Havacılık ve Uzay Mühendisliği

Aerospace EngineeringEngineering