Optics Express· 2026Q1
Thermal lensing-induced dynamic beam evolution and damage behaviors in a 1 kHz, 521 mJ nanosecond Ho:YLF MOPA system
- 0citations
- Q1SCImago
- 2026year
Short summary
A 1 kHz, 521 mJ nanosecond Ho:YLF MOPA system, the highest pulse energy reported for a 2-μm laser at this repetition rate, was developed. The study systematically investigated how thermal lensing affects beam quality and damage risk during power scaling.
AI-generated from the title and abstract; the full text is not read.
Key points
- A 1 kHz, 521 mJ nanosecond Ho:YLF MOPA system was developed, setting a new record for pulse energy at this repetition rate.
- Thermal lensing was identified as a key factor causing dynamic changes in beam profile, size, and fluence during power scaling.
- Anisotropy in the Ho:YLF material leads to asymmetric beam evolution in multistage amplifiers.
- The complex beam evolution under thermal lensing increases the risk of pulse-induced damage, impacting system stability.
AI-generated from the title and abstract; the full text is not read.
Abstract
A high-power, high-energy 2-μm Ho:YLF MOPA[A1] system delivering 521 mJ pulses with a pulse width of 20.3 ns at a repetition rate of 1 kHz was demonstrated using a polarization beam combining technique. To the best of our knowledge, this represents the highest pulse energy reported for a 2-μm operating at a high repetition rate. The thermal-lensing-induced beam evolution behavior and potential pulse-induced damage risk during the power-scaling process of the Ho:YLF amplifiers were systematically investigated. Experimental results show that the gradually established negative thermal lens continuously modifies the beam profile, beam size, and laser fluence during power scaling, whereas the pronounced anisotropy of the Ho:YLF further introduces asymmetric beam evolution in multistage amplifiers. Meanwhile, the complex, thermal-lensing-induced evolution of laser fluence during power-scaling may increase the risk of pulse-induced damage, particularly under the relatively low pump intensity used in the multistage amplifier, thereby compromising the safe and stable operation of the system.[A3] This study provides useful guidance for the design and optimization of multistage amplifier systems with anisotropic and negative thermal lensing effects.
The authors' abstract, as published at the source. Optics Express, 2026 · DOI ↗
Continue with a free account
Ask the paper: 3 free questions a day about this paper; save it, get its citation, new summaries every day for your field. Takeaways are Premium.
Continue free on the webSign in with Google or Apple; no card needed. You come back to this paper.
On your phone:
Field: Electrical and Electronic Engineering
Electrical and Electronic EngineeringEngineering