PofoliaShared via Pofolia

Water· 2026Q1

Sediment Transport and Wall-Collision Dynamics in a Cylindrical Asteroid-Shaped Drip Emitter Under Variable Hydraulic Conditions

Xingchang Han, Xianying Feng, Yanfei Li, Jiajun Zang et al.

Short summary

A novel cylindrical asteroid-shaped drip emitter retains 96.45–97.83% of its discharge but passes 81.3–92.7% of suspended sediment, with both metrics strongly correlated (r=0.975) to operating pressure (60-140 kPa).

AI-generated from the title and abstract; the full text is not read.

Key points

  • Discharge retention in the novel emitter ranged from 96.45% to 97.83% across pressures of 60-140 kPa.
  • The fraction of particulate mass leaving the emitter varied from 81.3% to 92.7%, closely following operating pressure (Pearson r = 0.975).
  • Higher operating pressures increased particle trajectory speeds and brought forward final wall contacts, though contact totals were not monotonic.
  • Expanding the emitter's radius from 0.65 to 0.85 mm drastically reduced particle impacts and led to sustained near-stagnation.

AI-generated from the title and abstract; the full text is not read.

Abstract

How suspended grains traverse energy-dissipating micro-passages determines whether sediment-laden water can be used without rapid emitter deterioration. A novel cylindrical asteroid-shaped drip emitter was investigated through laboratory anti-clogging tests and two-way coupled computational fluid dynamics–discrete element method (CFD–DEM) simulations. The laboratory tests comprised 20 intermittent irrigation cycles at five pressures ranging from 60 to 140 kPa, with relative discharge used to characterize hydraulic performance. The simulations tracked particle motion, wall collisions, and mass transmission over a 0.20 s observation window to examine the effects of operating pressure, injected particle mass, and flow-path radius. Numerical cases isolated hydraulic forcing and, at 100 kPa, changes in solids dose and cavity radius. Measured discharge retention occupied a narrow 96.45–97.83% interval, whereas the fraction of particulate mass leaving the domain spanned 81.3–92.7%. Despite representing different responses, both indices followed pressure in a closely associated manner (Pearson r = 0.975, p = 0.0046). Stronger forcing extended the high-speed portion of individual trajectories and brought the final wall contacts forward in time, although contact totals did not follow a monotonic sequence. Changing the dose between 1.0 and 2.0 × 10−6 kg altered the selected upper-speed statistics by only +1.8% and −2.1% but reshaped the contact histories. Expanding the radius from 0.65 to 0.85 mm produced much larger reductions of 28.1% and 91.3%; the latter record then showed sustained near-stagnation with relatively few impacts. Thus, low collision frequency cannot independently demonstrate effective sediment passage. Combining effluent mass balance with trajectory and contact information provides a mechanistic basis for diagnosing retention in irrigation microchannels.

The authors' abstract, as published at the source. Water, 2026 · DOI ↗

TakeawaysPremium
Ask the paperFree account

Continue with a free account

Ask the paper: 3 free questions a day about this paper; save it, get its citation, new summaries every day for your field. Takeaways are Premium.

Continue free on the web

Sign in with Google or Apple; no card needed. You come back to this paper.

On your phone:

Field: Soil Science

Soil ScienceAgricultural and Biological Sciences