PofoliaShared via Pofolia

MATEC Web of Conferences· 2018

Fine-grained concrete with combined reinforcement by different types of fibers

Sergey Klyuev, A.V. Klyuev, Nikolai Vatin

Short summary

Fine-grained concrete reinforced with combined steel wave and polypropylene fibers, using high-density mixture packing and composite binders, achieved a tensile compressive strength of 84.8 MPa and bending strength of 19.8 MPa on technogenic sands.

AI-generated from the title and abstract; the full text is not read.

Key points

  • Combined reinforcement with steel wave and polypropylene fibers was applied to fine-grained concrete.
  • High-density mixture packing and composite binders were used to improve strength and deformation.
  • The developed fiber concrete achieved a tensile compressive strength of 84.8 MPa and bending strength of 19.8 MPa.
  • The combined reinforcement mixture is 25% cheaper than steel-fiber-only concrete with the same composite binder.

AI-generated from the title and abstract; the full text is not read.

Abstract

The article deals with the application of combined reinforcement of fi-ne-grained concrete with steel wave and polypropylene fibers. High-density packaging of the mixture components was used to improve the strength and deformation characteristics. In order to reduce the cost of fibre concrete, composite binders were developed. Rational selection of filler and the use of a steel wave fiber gave the opportunity to get the fibre concrete with tensile compressive strength – 84.8 MPa, the tensile strength in bending – 19.8 MPa on technogenic sands of the Kursk Magnetic Anomaly. With combined reinforcement by steel and polypropylene fiber on technogenic sands of the Kursk magnetic anomaly fibre concrete with a tensile compressive strength – 82.8 MPa, in bending – 19.1 MPa was developed. With the same strength charac-teristics the developed mixture of fibre concrete based on combined re-inforcement due to reducing the amount of steel fiber at cost is lower by 25% compared to the composition on steel fiber and the same com-posite binder.

The authors' abstract, as published at the source. MATEC Web of Conferences, 2018 · DOI ↗

TakeawaysPremium
Ask the paperFree account

Continue with a free account

Ask the paper: 3 free questions a day about this paper; save it, get its citation, new summaries every day for your field. Takeaways are Premium.

Continue free on the web

Sign in with Google or Apple; no card needed. You come back to this paper.

On your phone:

Field: Nuclear Energy and Engineering

Nuclear Energy and EngineeringEnergy