PofoliaPofolia ile paylaşıldı

Institution of Engineering and Technology eBooks· 2019· Kitap bölümü

Geniş Bant Mikroşerit Antenler

Broadband microstrip antennas

Randy Bancroft

Kısa özet

Altındaki bir mikroşerit hat tarafından uyarılan bir zemin düzlemi yuvasının, üstteki bir yama ile birleşimi, geniş bant empedans eşleşmesi ve büyük empedans bant genişliği (tek elemanlar için %4-7) sağlayabilir.

Yapay zekâ ile başlık ve abstract'tan üretildi; tam metin okunmaz.

Ana noktalar

  • Mikroşerit antenler doğası gereği dar bantlıdır ve tipik olarak %4-7 empedans bant genişliği elde eder.
  • Anten hacmini artırmak (örn. daha kalın alt tabaka, daha düşük dielektrik sabiti) bant genişliğini genişletmek için bir yaklaşımdır.
  • Bir mikroşerit yamaya bağlanan bir zemin düzlemi yuvası konfigürasyonu, entegre bir eşleştirme ağı oluşturabilir ve geniş bant empedans eşleşmesi sağlayabilir.
  • Bu tür geniş bantlı antenlerin tasarımı deneyseldir ve etkileşimli parametreler nedeniyle uzun ve yorucu bir süreç olabilir.

Yapay zekâ ile başlık ve abstract'tan üretildi; tam metin okunmaz.

Özet (abstract)

Microstrip antennas are inherently narrow band. The typical bandwidth of a microstrip antenna is around 4%-7%. A considerable number of experimental approaches have been undertaken to develop microstrip antennas which have a broader impedance bandwidth than a single microstrip element achieves without external matching. The methods employed to increase impedance bandwidth are essentially variations of three approaches: (a) Increasing the antenna volume. This is accomplished by geometry changes which increase the volume under the patch (e.g. increasing the thickness h), decreasing the substrate dielectric constant, or adding additional coupled resonators. (b) The implementation of a matching network. (c) Perturbing the antenna geometry to create or relocate resonances using shorts and slots in the antenna. Kumar and Ray (2003) have compiled a considerable number of microstrip antenna design variations which utilize these approaches, as has Wong (2002). One approach is the use of a groundplane slot, which is excited by a microstrip line below the groundplane, which in turn couples to a microstrip patch which is above the groundplane. This configuration can be adjusted to produce an elegant matching network, low dielectric constant substrate for the patch, and maximized substrate thickness, which provides a broadband input impedance match, and a large impedance bandwidth. One implementation of this type of antenna is called SSFIP for Strip-Slot-Foam-Inverted Patch by Zürcher and Gardiol in the mid-1990s. The design of these antennas is experimental in nature. These researchers state: “Since the various parts of the antenna interact, determining the best design is a long and tedious process, even when carried out systematically.” The parameters which may be used to guide this type of design are found in the literature. Some possible alternatives to the SSFIP matching-network/thick patch design are explored in this Chapter.

Yazarların özeti; kaynağından alınmıştır. Institution of Engineering and Technology eBooks, 2019 · DOI ↗

ÇıkarımlarPremium
Makaleye SorÜcretsiz hesapla

Ücretsiz hesapla devam et

Makaleye Sor ile bu makaleye günde 3 soru ücretsiz; makaleyi kaydet, kaynakçasını al, ilgi alanına göre her gün yeni özetler. Çıkarımlar Premium.

Web'de ücretsiz devam et

Google ya da Apple hesabınla giriş; kart istemez. Bu makaleye geri dönersin.

Telefonda:

Alan: Havacılık ve Uzay Mühendisliği

Aerospace EngineeringEngineering