Journal of Thermoplastic Composite Materials· 2026Q2
Accelerated UV/condensation weathering, outdoor weathering and influence of aged/reprocessed ratios on mechanical, rheological and morphological properties of polyamide 6 composites: Comparing glass bead and glass fiber
- 0citations
- Q2SCImago
- 2026year
Short summary
Recycled polyamide 6 (PA6) composites with glass beads or fibers showed reduced mechanical and rheological properties after 12 months of outdoor weathering or 336 hours of accelerated UV/condensation aging, but mixing with virgin polymer partially restored these properties.
AI-generated from the title and abstract; the full text is not read.
Key points
- Outdoor and accelerated UV/condensation weathering reduced mechanical (tensile, impact, flexural) and rheological properties of PA6 composites.
- The degree of property degradation varied based on the type of reinforcement (glass bead vs. glass fiber) and its content (15% and 30% by weight).
- Blending aged PA6 composites with virgin PA6 at 25%, 50%, and 75% ratios partially restored mechanical and rheological properties.
- Morphological changes were also observed after weathering and reprocessing.
AI-generated from the title and abstract; the full text is not read.
Abstract
The usage of polymeric materials is rising, and they are exposed to the effects of light, temperature and water and their combination throughout their lifetime. The increased use of them has caused waste problems. From an environmental point of view, polymer reprocessing (recycling) is one of the good solutions to diminish waste problems. Therefore, in current research, the effect of reprocessing on the mechanical properties (tensile, impact, flexural), melt flow index and morphology was determined for aged polyamide 6 (PA6), glass bead reinforced PA6 composites with 15 and 30 wt% content and glass fiber reinforced PA6 composites with 15 and 30 wt% content. Virgin granules of PA6 and its composites were injection molded to understand the mechanical, rheological, and morphological properties. The samples were then exposed to natural weathering for up to a year in Gebze (Turkey) between August 2018 and August 2019 and artificially accelerated UV/condensation ageing for up to 336 hours in the chamber. After ageing process, naturally and UV aged specimens were ground and the ground specimens were mixed with virgin PA6 or its composites at rates of 25%, 50% and 75% by weight. The mixed polymeric materials were re-molded to manufacture test specimens, and then mechanical, rheological, and morphological properties were determined. Briefly, in current research, the mechanical, rheological, and morphological properties of virgin, aged for 12 months in outdoor environment, aged for 336 hours in UV chamber PA6 or its composites and blends of virgin-aged PA6 or its composites were studied. It was concluded that the change in mechanical and rheological properties varied according to the ageing environment and glass bead or glass fiber content. Generally, mechanical properties diminished with natural and accelerated UV/condensation ageing. But some retention in properties could be obtained with the addition of virgin polymer.
The authors' abstract, as published at the source. Journal of Thermoplastic Composite Materials, 2026 · DOI ↗
Continue with a free account
Ask the paper: 3 free questions a day about this paper; save it, get its citation, new summaries every day for your field. Takeaways are Premium.
Continue free on the webSign in with Google or Apple; no card needed. You come back to this paper.
On your phone:
Field: Polymers and Plastics
Polymers and PlasticsMaterials Science