PofoliaShared via Pofolia

AAPG Bulletin· 2013Q1

Organic matter–hosted pore system, Marcellus Formation (Devonian), Pennsylvania

K.L. Milliken, M.D. Rudnicki, David Awwiller, Tongwei Zhang

Short summary

In Pennsylvania's Marcellus Formation, most pores detectable by electron microscopy are linked to organic matter (OM), not the mineral matrix. Higher organic carbon content (TOC) above 5.5 wt.% does not increase porosity, and surprisingly, OM-hosted pore volume decreases significantly as TOC rises.

AI-generated from the title and abstract; the full text is not read.

Key points

  • Most FE-SEM detectable pores in the Marcellus Formation are hosted by organic matter (OM).
  • Porosity correlates positively with TOC up to 5.5 wt.%, but shows little increase beyond this threshold.
  • FE-SEM visible OM porosity decreases significantly with increasing TOC, from 30% to less than 1% of OM volume.
  • Pore volume detectable by FE-SEM represents a small fraction (2-32%) of total helium porosity.

AI-generated from the title and abstract; the full text is not read.

Abstract

Abstract The Marcellus Formation of Pennsylvania represents an outstanding example of an organic matter (OM)–hosted pore system; most pores detectable by field-emission scanning electron microscopy (FE-SEM) are associated with OM instead of mineral matrix. In the two wells studied here, total organic carbon (TOC) content is a stronger control on OM-hosted porosity than is thermal maturity. The two study wells span a maturity from late wet gas (vitrinite reflectance [Ro], ∼1.0%) to dry gas (Ro, ∼2.1%). Samples with a TOC less than 5.5 wt. % display a positive correlation between TOC and porosity, but samples with a TOC greater than 5.5 wt. % display little or no increase in porosity with a further increasing TOC. In a subset of samples (14) across a range of TOC (2.3–13.6 wt. %), the pore volume detectable by FE-SEM is a small fraction of total porosity, ranging from 2 to 32% of the helium porosity. Importantly, the FE-SEM–visible porosity in OM decreases significantly with increasing TOC, diminishing from 30% of OM volume to less than 1% of OM volume across the range of TOC. The morphology and size of OM-hosted pores also vary systematically with TOC. The interpretation of this anticorrelation between OM content and SEM-visible pores remains uncertain. Samples with the lowest OM porosity (higher TOC) may represent gas expulsion (pore collapse) that was more complete as a consequence of greater OM connectivity and framework compaction, whereas samples with higher OM porosity (lower TOC) correspond to rigid mineral frameworks that inhibited compactional expulsion of methane-filled bubbles. Alternatively, higher TOC samples may contain OM (low initial hydrogen index, relatively unreactive) that is less prone to development of FE-SEM–detectable pores. In this interpretation, OM type, controlled by sequence-stratigraphic position, is a factor in determining pore-size distribution.

The authors' abstract, as published at the source. AAPG Bulletin, 2013 · DOI ↗

TakeawaysPremium
Ask the paperFree account

Continue with a free account

Ask the paper: 3 free questions a day about this paper; save it, get its citation, new summaries every day for your field. Takeaways are Premium.

Continue free on the web

Sign in with Google or Apple; no card needed. You come back to this paper.

On your phone:

Field: Mechanics of Materials

Mechanics of MaterialsEngineering