ACS Applied Polymer Materials· 2026Q1
High-Performance Reverse-Mode Liquid Crystal Smart Windows via Co-Optimization of a Phosphate Self-Assembled Interface, a Polyurethane Acrylate Polymer Network, and a Patterned Microstructure
- 0citations
- Q1SCImago
- 2026year
Short summary
New reverse-mode liquid crystal smart windows achieve 7.2V saturation voltage and 178 contrast ratio by co-optimizing a phosphate self-assembled interface, a polyurethane acrylate polymer network, and a patterned microstructure.
AI-generated from the title and abstract; the full text is not read.
Key points
- A phosphate self-assembled monolayer (SAM) using octadecyl phosphate and bis(2-(methacryloyloxy)ethyl) phosphate ensures uniform liquid crystal alignment and stable interfacial coupling.
- A flexible polyurethane acrylate polymer network is introduced to optimize internal structure and mitigate electro-optical performance trade-offs.
- A two-step exposure method creates periodic polymer-wall microstructures, boosting electro-optical properties and cyclic stability.
- The optimized RPSLC smart windows demonstrate a low saturation voltage of 7.2V, a contrast ratio of 178, and excellent long-term cyclic stability.
AI-generated from the title and abstract; the full text is not read.
Abstract
Abstract Reverse-mode polymer-stabilized liquid crystal (RPSLC) smart windows exhibit voltage off transparency and voltage on scattering, which are well aligned with the requirements of daylighting and solar heat insulation in buildings. These characteristics make RPSLC smart windows promising energy-saving light-modulating devices for building applications. Existing RPSLC devices suffer from uneven interfacial alignment, the mutual restriction between electro-optical properties, and poor cyclic stability. To address these problems, this work carries out an integrated collaborative optimization from three dimensions of interface, polymer components, and microstructure. A self-assembled monolayer (SAM) is constructed using a mixed system of octadecyl phosphate and bis(2-(methacryloyloxy)ethyl) phosphate. The resulting SAM enables uniform vertical alignment of the liquid crystals and strengthens interfacial coupling stability through chemical bonding. Flexible polyurethane acrylate is then introduced to optimize the internal polymer network structure and alleviate the trade-off in the electro-optical performance of the devices. In addition, a two-step exposure method is used to construct periodic polymer-wall microstructures and enhance the electro-optical properties and cyclic stability of the devices. The experimental results show that the saturation voltage of the prepared reverse-mode polymer-wall stabilized liquid crystal smart windows is only 7.2 V, the contrast ratio can reach 178, and they simultaneously possess excellent long-term cyclic stability. This strategy provides useful guidance for the design of RPSLC smart windows with improved electro-optical performance and cyclic stability for building-related applications.
The authors' abstract, as published at the source. ACS Applied Polymer Materials, 2026 · DOI ↗
Continue with a free account
Ask the paper: 3 free questions a day about this paper; save it, get its citation, new summaries every day for your field. Takeaways are Premium.
Continue free on the webSign in with Google or Apple; no card needed. You come back to this paper.
On your phone:
Field: Electronic, Optical and Magnetic Materials
Electronic, Optical and Magnetic MaterialsMaterials Science