Clinical Oral Investigations· 2026Q1
Kuron ile tutturulan sabit diş protezinin yük taşıma kapasitesi ve Weibull özellikleri: Zirkonya tipi, yapıştırılan alt tabaka ve yaşlandırmanın etkisi
Load-bearing capacity and Weibull characteristics of inlay-retained fixed dental prosthesis: Effect of zirconia type, bonded substrate and aging
- 0atıf
- Q1SCImago
- 2026yıl
Kısa özet
Diş protezleri için kullanılan yüksek yarı saydam ve dereceli zirkonya türleri alt tabakaya bağlı kırılma yükleri gösterirken, 3Y zirkonya daha tutarlı bir performans sergiledi, özellikle yaşlandırma sonrası.
Yapay zekâ ile başlık ve abstract'tan üretildi; tam metin okunmaz.
Ana noktalar
- IRFDP'lerin kırılma yükü, zirkonya tipi, alt tabaka ve yaşlandırmadan önemli ölçüde etkilenmiştir.
- Yüksek yarı saydam (HTML) ve dereceli (YML) zirkonya, alt tabakaya bağlı performans göstermiştir; yaşlandırma sonrası HTML-diş en yüksek kırılma yükünü vermiştir (1727 ± 351 N).
- 3Y zirkonya (ZirCAD LT), alt tabakalar ve yaşlandırma boyunca daha tutarlı kırılma yükleri göstermiştir.
- Weibull analizi, yaşlandırma sonrası tüm zirkonya türleri için karşılaştırılabilir güvenilirlik göstermiştir.
Yapay zekâ ile başlık ve abstract'tan üretildi; tam metin okunmaz.
Özet (abstract)
Abstract Objectives This study evaluated the load-bearing capacity and reliability of different zirconia materials used for inlay-retained fixed dental prostheses (IRFDPs) , considering the influence of substrate type (tooth substrate or resin composite) and thermo-mechanical aging. Materials and methods IRFDPs ( N = 160) were fabricated using four zirconia materials: IPS e.max ZirCAD LT (3Y-TZP), Katana YML (3Y-5Y graded zirconia), Katana HTML Plus, and Katana STML ( n = 40 each). Restorations were adhesively cemented onto tooth or resin composite substrates and tested either under dry conditions or after thermo-mechanical aging (1,200,000 cycles, 50 N, 5–55 °C). Fracture load was determined using monotonic load-to-fracture testing. Data were analyzed using two-way ANOVA and Tukey’s test (α = 0.05). Reliability of durability was assessed using Weibull analysis. Results Under dry conditions, material ( p = 0.0047), substrate ( p = 0.0237), and their interaction ( p = 0.0004) significantly influenced fracture load. YML-composite (1406 ± 386 N) and HTML-composite (1142 ± 249 N) showed higher values than STML-composite (553 ± 246 N). No significant differences were observed on tooth. substrate After aging, material and interaction effects remained significant ( p < 0.05). HTML-tooth showed the highest fracture load (1727 ± 351 N), while STML-composite showed the lowest (718 ± 292 N). Weibull analysis indicated comparable reliability after aging. Conclusions Zirconia type and substrate significantly influenced mechanical performance of IRFDPs. High-translucent and graded zirconia showed substrate-dependent behavior, whereas 3Y zirconia was more stable. Clinical relevance Zirconia selection and bonding substrate influence fracture resistance of IRFDPs. High-translucent zirconia requires careful substrate selection, while 3Y zirconia provides more consistent performance in posterior applications.
Yazarların özeti; kaynağından alınmıştır. Clinical Oral Investigations, 2026 · DOI ↗
Ücretsiz hesapla devam et
Makaleye Sor ile bu makaleye günde 3 soru ücretsiz; makaleyi kaydet, kaynakçasını al, ilgi alanına göre her gün yeni özetler. Çıkarımlar Premium.
Web'de ücretsiz devam etGoogle ya da Apple hesabınla giriş; kart istemez. Bu makaleye geri dönersin.
Telefonda:
Alan: Ortodonti
OrthodonticsDentistry