The Use of Clay as an Engineered Barrier in Radioactive-Waste Management — A Review

Abstract

Abstract Geological disposal is the preferred option for the final storage of high-level nuclear waste and spent nuclear fuel in most countries. The selected host rock may be different in individual national programs for radioactive-waste management and the engineered barrier systems that protect and isolate the waste may also differ, but almost all programs are considering an engineered barrier. Clay is used as a buffer that surrounds and protects the individual waste packages and/or as tunnel seal that seals off the disposal galleries from the shafts leading to the surface. Bentonite and bentonite/sand mixtures are selected primarily because of their low hydraulic permeability in a saturated state. This ensures that diffusion will be the dominant transport mechanism in the barrier. Another key advantage is the swelling pressure, which ensures a self-sealing ability and closes gaps in the installed barrier and the excavation-damaged zone around the emplacement tunnels. Bentonite is a natural geological material that has been stable over timescales of millions of years and this is important as the barriers need to retain their properties for up to 10 6 y. In order to be able to license a final repository for high-level radioactive waste, a solid understanding of how the barriers evolve with time is needed. This understanding is based on scientific knowledge about the processes and boundary conditions acting on the barriers in the repository. These are often divided into thermal, hydraulic, mechanical, and (bio)chemical processes. Examples of areas that need to be evaluated are the evolution of temperature in the repository during the early stage due to the decay heat in the waste, re-saturation of the bentonite blocks installed, build-up of swelling pressure on the containers and the surrounding rock, and degradation of the montmorillonite component in the bentonite. Another important area of development is the engineering aspects: how can the barriers be manufactured, subjected to quality control, and installed? Geological disposal programs for radioactive waste have generated a large body of information on the safety-relevant properties of clays used as engineered barriers. The major relevant findings of the past 35 y are reviewed here.

The authors' abstract, as published at the source. Clays and Clay Minerals, 2013 · DOI ↗