Ceramics and Composites papers
Pofolia’s corpus holds 20 papers from Ceramics and Composites (2026–2026), each with a short summary. Below, the 20 most-cited, then the most recently added.
At a glance
- Most cited: How surface governs vibration-induced degradation of glass Structure: A view from molecular dynamics (2026, 0 citations).
- The 20 papers listed have 0 citations between them.
- 5 of the 20 with a known journal quartile appeared in a Q1 journal.
- 6 have a free full text (open access).
- Most frequent journals: International Journal of Applied Ceramic Technology, Journal of Non-Crystalline Solids, ACS Applied Optical Materials.
- Published between 2026 and 2026.
Most cited
Ranked by citation count. Because citations accumulate over time, this list naturally leans towards work published a few years ago; for where the field is now, see “recently added”. How to read the signals
How surface governs vibration-induced degradation of glass Structure: A view from molecular dynamics
Journal of Non-Crystalline Solids · 2026 · Q2
Molecular dynamics simulations reveal that surface vibration loosens silica glass's local structure and degrades network connectivity, evidenced by a 150% increase in the main G(r) peak's full width at half maximum (FWHM) and a slight increase in average ring size after three vibration cycles.
Effect of alkali species on the crystallization behavior of alkali niobate silicate glass
Journal of Non-Crystalline Solids · 2026 · Q2 · Open access
Replacing Li/Na with Rb/Cs in alkali niobate silicate glasses shifts crystallization from surface-dominated binary niobate phases to silicate-containing phases with sub-10 nm nanocrystallization.
Lanthanide-Doped Transparent Glass-Ceramics: Enabling Compact Laser Sources through Nanostructure Engineering
ACS Applied Optical Materials · 2026 · Q2
Nanostructure engineering in lanthanide-doped transparent glass-ceramics (GCs) enables compact, wavelength-tailored laser sources by controlling crystal precipitation for optimized lanthanide ion environments.
Enhanced Ablation Resistance of Phenolic Resin at 1400–2300 °C through Zirconium-Doping-Induced Heterogeneous Melt Strengthening and Graphitization Transition
Industrial & Engineering Chemistry Research · 2026 · Q1
Zirconium-doped phenolic resin (SiCBPR-Zr) forms an ultrastable, highly viscous ceramic shield that reduces linear ablation rate by 56.02% and mass ablation rate by 25.55% compared to undoped resin under oxyacetylene heat flux.
Effect of CaO/La2O3 on Crystallization Behavior and Properties of Li2O-Al2O3-SiO2 Glass Ceramics
Coatings · 2026 · Q2
The C4L6 composition of Li2O-Al2O3-SiO2 glass ceramics, treated at 800°C, achieved a bending strength of ~160 MPa and a thermal expansion coefficient of 3.64 × 10−6 K−1, demonstrating optimal performance due to a balance of crystallization, microstructure, and phase composition.
Interface Engineering in FAST/SPS-Processed Multi-Material Metallic Systems: Bonding Mechanisms, Interfacial Reactions, and Mechanical Integrity
Metals · 2026 · Q2
Field-assisted sintering technology/spark plasma sintering (FAST/SPS) can directly join dissimilar metals, but bond strength depends on real contact, oxide disruption, and interfacial reactions that alter composition and phase morphology.
Exploring the structure and luminescence properties of Dy3 + ions doped oxyantimony lead borobarium glasses for photonic devices
Next Materials · 2026 · Q1 · Open access
Dy3+ doped oxyantimony lead borobarium glasses, prepared via melt-quenching, exhibit emission at red (664 nm), yellow (575 nm), and blue (482 nm) wavelengths, with one composition falling within the white light zone of CIE 1931 coordinates.
Conventional Sintering for Unconventional Performance: Robust Amorphous Carbon/Diamond Composites
Materials Today · 2026 · Q1 · SJR 4.00
A novel amorphous carbon/diamond composite is synthesized via conventional sintering, achieving strong covalent interfaces and superior mechanical, electrical, and tribological properties without extreme pressure.
Synthesis and solid-state characterization of RbNaCaSi 4 O 10 – the first phase in the quaternary system Rb 2 O–Na 2 O–CaO–SiO 2
Zeitschrift für Kristallographie - Crystalline Materials · 2026 · Q2
Researchers synthesized the first known crystalline rubidium sodium calcium silicate, RbNaCaSi 4 O 10 , from a devitrified glass at 750°C.
Fabrication of Millimeter‐Sized Prismatic Silicon Carbide Fibers via a Catalyst‐Free Thermal Evaporation Method
International Journal of Applied Ceramic Technology · 2026 · Q2
Millimeter-sized prismatic silicon carbide (SiC) fibers with periodic serrated structures were synthesized via a simple catalyst-free thermal evaporation method at 1700°C.
Effect of Heating Rate on the One‐Pot Synthesis of ZrB 2 –ZrC–SiC Ceramics by PDC Route
International Journal of Applied Ceramic Technology · 2026 · Q2 · Open access
A one-pot synthesis route blending zirconoborosiloxane (ZBS) and divinylbenzene (DVB) yields ZrB 2–ZrC–SiC ceramics upon pyrolysis, with heating rates of 1, 3, and 5°C/min influencing the resulting ceramic phases.
Hot Pressing Sintering and Properties of Silicon Carbide/Graphite Composite Ceramics Containing 30 wt% Graphite
International Journal of Applied Ceramic Technology · 2026 · Q2
Hot pressing sintering enables the preparation of silicon carbide/graphite composites with 30 wt% graphite, achieving a bulk density of 2.763 g/cm³, bending strength of 318 MPa, and a low coefficient of friction of 0.172.
Novel Er3+/Nd3+-doped borofluoride glass materials for NIR optical fiber applications with suitable thermal and mechanical properties
Scientific Reports · 2026 · Q1 · Open access
A novel borofluoride glass doped with Er3+, Nd3+, or both exhibits enhanced thermal stability, mechanical rigidity, and broadband near-infrared (NIR) emission centered at 1.55 μm, making it suitable for high-performance optical fibers.
Predicting Nepheline Formation in Nuclear Waste Glasses Using Machine Learning With Uncertainty Quantification
International Journal of Applied Glass Science · 2026 · Q2 · Open access
A dual-head partially Bayesian neural network with scaled regression loss predicts nepheline precipitation in nuclear waste glasses, reducing false positives by 25% compared to binary discriminators and enabling exploration of novel compositional regions.
Synthesis of Conical SiC Nanowhiskers From Hybrid Electrospun PVA / SiO 2 / MWCNT Nanofibers
Journal of Applied Polymer Science · 2026 · Q2 · Open access
Catalyst-free synthesis of single-crystal SiC nanowhiskers with uniform conical morphology was achieved by carbothermal reduction of hybrid PVA/SiO2/MWCNT nanofibers.
Micromechanical study of alkali-activated GGBS/FA binders: Insights from microscale testing and homogenization analysis
Construction and Building Materials · 2026 · Q1 · SJR 2.00
A multiscale micromechanical framework accurately predicts the elastic modulus (error <10%) and strength evolution of alkali-activated GGBS/FA binders, linking microstructure to mechanical performance.
A Comparative Evaluation and a Benefit Assessment of Sintering α‐Al 2 O 3 in Induction and Conventional Furnaces
International Journal of Applied Ceramic Technology · 2026 · Q2
Induction heating achieves higher density (98.2%) and hardness (2060 HV) in α‐Al 2 O 3 ceramics compared to conventional furnaces (97.1% density, 1980 HV) at 1500°C, while reducing energy consumption by 92.37%.
From Mid-Infrared Luminescence to Laser Gain in Chalcogenide Glasses and Glass-Ceramics
Journal of Advanced Dielectrics · 2026 · Q2
Chalcogenide glasses and glass-ceramics show promise as gain media for mid-infrared (2-6 μm) lasers, with recent progress in rare-earth and transition-metal doping enabling demonstrations across various platforms.
EXPRESS: A Novel Er 3+ Doped SiO 2 -Al 2 O 3 -Na 2 O-CaO Glass Materials for Near-Infrared Photonic Applications: Unveiling the Structural, Optical Absorption, Optical Bandgap Energy, Photoluminescence, and Spectroscopic Properties
Applied Spectroscopy · 2026 · Q2
A new Er 3+ doped aluminosilicate glass (A3 composition) exhibits superior optical properties, including intense green and near-infrared (1.55 μm) emissions, due to enhanced structural connectivity and site asymmetry around Er 3+ ions.
Role of Na in determining the properties of sodic glasses
Journal of Non-Crystalline Solids · 2026 · Q2
Molecular Dynamics simulations show Na-O bonds in Na4SiO4 glass mimic sodic crystals, driven by SiO4 tetrahedral collapse around Na (electrostriction), with bond distances peaking at ~2.38Å and ~4.8Å.
Recently added
Role of Na in determining the properties of sodic glasses
Journal of Non-Crystalline Solids · 2026 · Q2
Molecular Dynamics simulations show Na-O bonds in Na4SiO4 glass mimic sodic crystals, driven by SiO4 tetrahedral collapse around Na (electrostriction), with bond distances peaking at ~2.38Å and ~4.8Å.
From Mid-Infrared Luminescence to Laser Gain in Chalcogenide Glasses and Glass-Ceramics
Journal of Advanced Dielectrics · 2026 · Q2
Chalcogenide glasses and glass-ceramics show promise as gain media for mid-infrared (2-6 μm) lasers, with recent progress in rare-earth and transition-metal doping enabling demonstrations across various platforms.
EXPRESS: A Novel Er 3+ Doped SiO 2 -Al 2 O 3 -Na 2 O-CaO Glass Materials for Near-Infrared Photonic Applications: Unveiling the Structural, Optical Absorption, Optical Bandgap Energy, Photoluminescence, and Spectroscopic Properties
Applied Spectroscopy · 2026 · Q2
A new Er 3+ doped aluminosilicate glass (A3 composition) exhibits superior optical properties, including intense green and near-infrared (1.55 μm) emissions, due to enhanced structural connectivity and site asymmetry around Er 3+ ions.
Predicting Nepheline Formation in Nuclear Waste Glasses Using Machine Learning With Uncertainty Quantification
International Journal of Applied Glass Science · 2026 · Q2 · Open access
A dual-head partially Bayesian neural network with scaled regression loss predicts nepheline precipitation in nuclear waste glasses, reducing false positives by 25% compared to binary discriminators and enabling exploration of novel compositional regions.
Synthesis of Conical SiC Nanowhiskers From Hybrid Electrospun PVA / SiO 2 / MWCNT Nanofibers
Journal of Applied Polymer Science · 2026 · Q2 · Open access
Catalyst-free synthesis of single-crystal SiC nanowhiskers with uniform conical morphology was achieved by carbothermal reduction of hybrid PVA/SiO2/MWCNT nanofibers.
Fabrication of Millimeter‐Sized Prismatic Silicon Carbide Fibers via a Catalyst‐Free Thermal Evaporation Method
International Journal of Applied Ceramic Technology · 2026 · Q2
Millimeter-sized prismatic silicon carbide (SiC) fibers with periodic serrated structures were synthesized via a simple catalyst-free thermal evaporation method at 1700°C.
Effect of Heating Rate on the One‐Pot Synthesis of ZrB 2 –ZrC–SiC Ceramics by PDC Route
International Journal of Applied Ceramic Technology · 2026 · Q2 · Open access
A one-pot synthesis route blending zirconoborosiloxane (ZBS) and divinylbenzene (DVB) yields ZrB 2–ZrC–SiC ceramics upon pyrolysis, with heating rates of 1, 3, and 5°C/min influencing the resulting ceramic phases.
Hot Pressing Sintering and Properties of Silicon Carbide/Graphite Composite Ceramics Containing 30 wt% Graphite
International Journal of Applied Ceramic Technology · 2026 · Q2
Hot pressing sintering enables the preparation of silicon carbide/graphite composites with 30 wt% graphite, achieving a bulk density of 2.763 g/cm³, bending strength of 318 MPa, and a low coefficient of friction of 0.172.
Journals in this field
The journals that publish most of this field’s papers. Quartile (Q1–Q4), SJR and h-index are from SCImago Journal Rank; “in this field” is how many of the journal’s pooled papers belong here. What is a Q1 journal? · What is the h-index?
| Journal | Quartile | SJR | h-index | In this field | Summaries |
|---|---|---|---|---|---|
| International Journal of Applied Ceramic Technology | Q2 | — | 80 | 4 | 4 |
| Journal of Non-Crystalline Solids | Q2 | — | 179 | 3 | 3 |
| Materials Today | Q1 | 4.00 | 262 | 1 | 8 |
| Construction and Building Materials | Q1 | 2.00 | 322 | 1 | 6 |
| Journal of Applied Polymer Science | Q2 | — | 206 | 1 | 4 |
| Industrial and Engineering Chemistry Research | Q1 | — | 278 | 1 | 9 |
| Scientific Reports | Q1 | — | 382 | 1 | 170 |
| Metals | Q2 | — | 100 | 1 | 4 |
Every journal in Ceramics and Composites (Q1–Q4) →
Add this field to your daily feed
Pick your interests and new work in your area arrives every day, summarised. Full summaries live in the app.
Open the appOther subfields in Materials Science
- Biomaterials
- Electronic, Optical and Magnetic Materials
- Materials Chemistry
- Metals and Alloys
- Polymers and Plastics
- Surfaces, Coatings and Films